Output-calibrated • Interior-cleaned every visit • Pretreatment-ready documentation
Output-Calibrated, Interior-Cleaned, Pretreatment-Ready
An interceptor that passes visual inspection while failing pretreatment requirements isn't a compliant system. It's a liability with a clean surface.
Large-capacity grease interceptors serve high-output commercial operations under stricter regulatory frameworks than standard kitchen grease traps. The pretreatment programs governing them require specific documentation, enforced service frequency, and evidence of system condition that goes beyond an extraction receipt.
Simix Greasetrap Cleaner designs interceptor pumping programs for commercial facilities in Taos, NM that satisfy all three — with service derived from measured fill rate data, interior cleaning included at every visit, and documentation formatted for pretreatment review from day one.
We understand the unique challenges of commercial and institutional grease interceptor management in Taos, NM
A 1,000-gallon interceptor serving a kitchen generating 45 gallons of FOG per day needs service every 16 days. If that kitchen has grown and the program still runs monthly, the system is over-threshold between visits. Simix measures current fill rates and recalibrates.
Healthcare facilities, university dining, and large-scale contract food service operations face documentation requirements that differ specifically from standard health department FOG compliance. Simix's pretreatment-grade documentation meets those requirements without retrofitting.
Processing operations generate grease at rates that require service every 10–14 days — a frequency that standard food service intervals don't approximate. Simix builds processing-specific programs from measured accumulation data.
Fill rate is the aggregate of multiple kitchens. Simix coordinates service timing, tracks per-tenant contribution where facility agreements require it, and produces documentation that satisfies both building-level and individual tenant compliance requirements.
Service frequency derived from tracked fill rate data. High-capacity vacuum equipment for full commercial interceptor extraction. Schedule adjustments triggered by output measurement changes rather than by fixed review calendars.
Call Now to Optimize Your ScheduleExtraction removes the contents. Interior cleaning addresses what extraction leaves behind — wall scale, baffle surface accumulation, inlet zone buildup. Both are included in every Simix interceptor service.
Get Interior Cleaning IncludedPre- and post-service inspection with condition measurements at every visit. Documentation formatted to satisfy pretreatment program requirements.
Request Compliance Documentation SampleWhen an interceptor fills ahead of schedule or a component failure creates urgency, Simix responds and recalibrates.
Structured and data-transparent. Service confirmations before each visit. Condition reports with measurements after each visit. A program contact who can explain the fill rate trend and the performance data behind every scheduling decision — not just confirm the next date.
For multi-site operators and multi-tenant facilities in Taos, Simix consolidates the coordination overhead. One documentation standard. One consolidated performance summary per facility per quarter. The analytical work that would require a dedicated staff member to manage is absorbed by Simix's program architecture.
Baffle degradation that interior inspection reveals and access lid inspection misses. Simix documents internal baffle condition at every service visit with specific observations. A baffle trending toward failure is flagged before it fails structurally.
Sludge consolidation that compounds with deferred service. Organic sludge past its service window in a large interceptor compresses and hardens. Once consolidated, hydro jetting and extended service time are required — at higher costs. Simix's fill rate-derived intervals prevent this.
Documentation that satisfies a receipt requirement but not a pretreatment reviewer. Pretreatment programs require volume by layer, component condition notes, disposal manifest, and service frequency relative to threshold. Simix produces all of this automatically.
Most commercial operators in Taos, NM manage their grease interceptor by a single data point: the date of last service. This approach leaves two critical variables unmeasured — daily accumulation rate and the gap between rated capacity and actual working capacity.
Daily accumulation rate is the number of gallons — or the percentage of working volume — that enters the interceptor per day of kitchen operation. It's calculated by measuring combined FOG and sludge depth at two consecutive service visits and dividing the increase by the number of days between visits. This number determines the correct service interval.
Actual working capacity is rated volume minus the volume consumed by interior scale accumulation. A 1,000-gallon interceptor that has never been properly cleaned may have 150–200 gallons of interior scale. Its actual working capacity is 800–850 gallons, not 1,000.
"The actionable guidance: ask your service provider for both numbers at your next service visit. If they can't produce them, they're not maintaining a performance record — they're maintaining a visit calendar. Simix derives both from every interceptor service in Taos, documents them at each visit, and uses them to keep program intervals calibrated to what the system is actually doing."
"Simix was the first provider who showed me the fill rate calculation for our interceptors. Two of our three locations had been over-threshold between visits... They adjusted the intervals, and our first pretreatment review after switching was clean across the group."
"Educational food service faces documentation requirements that most grease providers aren't configured for. Simix understood that from the first conversation. Their pretreatment documentation format is exactly what our compliance audit requires."
"Managing interceptor service and per-tenant documentation across ten kitchen operators sharing one interceptor was something I assumed would require significant administrative effort... Simix built a system that handles it entirely on their side."
Simix services interceptors from 500 gallons through large commercial and institutional systems of 1,500 gallons and above. Equipment is matched to system volume for complete extraction without multiple mobilizations in most commercial situations.
We track combined FOG and sludge depth at each of the first two to three service visits and calculate the facility's actual daily accumulation rate. We derive the interval from that number and update it when facility output patterns change.
Condition on arrival with fill depth measurements, volume extracted by layer, interior cleaning performed, components inspected with condition observations, disposal manifest, and technician notes. Formatted to satisfy municipal pretreatment program requirements in Taos, NM.
Yes. Simix schedules interceptor service during early morning, late evening, or weekend windows for facilities that cannot accommodate mid-shift service.
We document it with specific measurements, explain it on-site in operational terms, and provide a clear urgency assessment. Minor components are addressed during the visit where possible. Structural repairs requiring more involved work are documented with the specificity needed for an informed facility decision.
A Simix grease interceptor pumping program in Taos, NM is designed from output measurements, maintained with interior cleaning at every visit, and documented to pretreatment program standards from the first service call.
For commercial and institutional operations that require their interceptor program to perform as well as it documents, Simix delivers both.